NORSOK M501 ED6
MOD AND ACCOCIATES
TOTAL GS EP COR 350
This list list not exhaustive
Brightstar currently employ two fully competent and conversant inspectors ensuring that all products meet our client’s full expectations and working within the parameters of the specification. We also have access to Nace level 3 Coating inspection when the specification requires it.
Our in-house team can provide full quality plans including pre-job conferencing, Inspection test plans and full quality reports. We only use ‘Elcometer’ testing equipment along with the data processing software ‘Elcomaster’ copies of current ISO certification and calibration records can be provided upon request.
- ELCOMETER 224 + 123 Surface Profile Meter
- ELCOMETER 319 Digital Dewpoint Meter
- ELCOMETER 138 Salt Contamination
- ELCOMETER 142 Dust Tape Test
- ELCOMETER 145 Dust Tape Roller
- P.T.E Surface Comparator Plate
- ELCOMETER 456 DFT GUuage
- ELCOMETER 3238 WFT Guage
- ELCOMETER 990 CAalibration Shims
- ELCOMASTER Data Management Software
- Pull off Adhesion Pinhole / Holiday Testing
Blast Cleaning Standards
SA3 – SSPC 5 – NACE 1
When viewed without magnification the surface must be free from visible oil, grease and dirt and free from mill scale, rust, coatings and foreign matter. It shall have a uniform metallic colour.
VERY THOROUGH BLAST CLEANING
SA2.5 – SPPC 10 – NACE 2
When viewed without magnification the surface must be free from visible oil, grease and dirt and from most of the mill scale, rust, coatings and foreign matter. Any remaining traces of contamination shall show only as slight stains in the form of spots or stripes.
THOROUGH BLAST CLEANING
SA2 – SSPC 10 – NACE 3
When viewed without magnification, the surface shall be free from visible oil grease and dirt, and from most of the mill scale, rust, coatings and foreign matter. Any residual contamination shall be firmly adhering.
LIGHT BLAST CLEANING
SA1 – SSPC 7 – NACE 4
When viewed without magnification, the surface shall be free from visible oil, grease and dirt, and from poorly adhering mill scale, rust, coatings and foreign matter.
ISO Standards we adhere to for Shotblasting & Protective Coatings
As well as our CE marking / ISO 1090-1 and ISO 9001-2008 quality management systems and standard operating procedures, we follow the industry standards as below (not exhaustive):